Top 10 Best Monoblock Amplifier For 12 Sub Of 2022 – Review And Buying Guide

Features :

• COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit
• CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
• SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
• CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power; Switchable input sensitivity: 100mV 2V or 2V 8V; Selectable bass boost (0 to +18dB); Signal to noise ratio: 102dB; Frequency response: 20 20KHz; Dimensions (H x W x L): 2.19 x 10 x 10 inches; Remote control included
• INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; (3) Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties

Features :

• COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a 4 gauge amp installation wiring kit
• CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
• SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
• CAR AMPLIFIER: Planet Audio Monoblock A/B MOSFET power Amplifier delivers 2000 watts maximum power, 1500 watts x 1 RMS @ 2 ohm and 750 watts x 1 RMS @ 4 ohm; Low pass filter: 50-250 Hz; Bass boost: Variable 0-12 dB; Dimensions: 12.75 x 7 x 2.39 inches; Remote control included
• INSTALLATION WIRING KIT: Deluxe high quality fuse holder; Gold-plated ANL fuse (100 amps); 17-ft 4-gauge Super Flex orange cable; 3ft 4-gauge Super Flex blue cable; 17-ft 18-gauge blue turn-on wire; 25-ft 16-gauge Super Flex speaker wire; 17-ft deluxe RCA interconnect; 3 grommets; 5/16-in gold plated ring terminal; 1/4-in gold plated ring terminal; # 10 gold-plated ring terminal; 4 gold-plated speaker terminals; 20, 4-inch wire ties

Features :

• ADD BASS: Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard ensures the enclosure contains low frequency sound waves generated by the subwoofer
• MONO BLOCK AMPLIFIER: 250-watt mono block amplifier that easily connects to any source, including factory radios
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

Features :

• power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
• low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
• low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
• variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it

Features :

• KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies.
• 24dB subsonic filter for protection from potentially damaging frequencies. FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation.
• Compatible with CXARC Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 15.75 inch x 9 inch x 4 inch. Weight: 7.75 lbs.
• Specifications: Power Rating: 4 ohms: 600 watts x 1 chan., 2 ohms: 1200 watts x 1 chan., 1 ohms: 1200×1 +/-10% chan.
• CXRC Remote Bass Capable (sold sep.). Dimensions: 12 in. (30,6 mm). Frequency Response: 25 – 200Hz. Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V. Signal to Noise Ration: 95dB. Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave. Subsonic Filter @ 25hz, 24db/octave. KickEQ Boost: Variable 0-6dB @40Hz.

Features :

• 2000 W MAX Power @ 2 Ohm x 1 Channel
• 1000 W MAX Power @ 4 Ohm x 1 Channel
• High and Low Level Inputs
• Variable Low Pass Crossover, Variable Bass Boost
• Remote Subwoofer Control
• Blue Backlit Illumination
• Dimensions: Depth 12.8” x Width 7” x Height 2.4”

Features :

• Can handle a peak power 600 watts total
• Single 12″ ported subwoofer enclosure for more efficiency giving you more bass output per watt
• Polypropylene cone that is lightweight yet strong provides accurate mid and low notes for better sound quality
• All-in-one complete subwoofer package compatible with any vehicle
• Easy-to-install so you can enjoy listening on your favorite music right away

Features :

• Inside the sub, the poly-cotton, semi-progressive-roll spider supplies substantial stability for the loudest bass possible. Externally, a ribbed Santoprene surround protects the cone during max excursion.
• Injection-Molded Thick Polypropylene Cone
• UniPlate Extended Pole Piece & Backplate For Superior Heat Dissipation
• Ribbed Santoprene Surround
• Signature Double Blue Surround Stitching

Features :

• Power – 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
• Full Range – With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Gain Control – The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Specs – Dimensions 14” x 10 3” x 2 3” Weight 9 lbs
• – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through We strongly encourage professional installation of this product to ensure proper and safe functionality

Features :

• Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs.
• Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality