10 Best Lithium Ion Batteries For Motorcycles of 2021

Top 10 Lithium Ion Batteries For Motorcycles: Editor Recommended

Features:

A charger to use with the most advanced high-power Lithium Iron Phosphate battery technology from BikeMaster.The unit is designed for charging / maintaining lithium-ion batteries.Input: AC 120V, 60Hz; Output: DC 12V, 2A.Built-in circuit protection guards

Features:

Antigravity AG-801 Lithium Motorcycle/Motorsports Battery, Small Case format
Built in the USA to high quality standards with unbreakable all-Brass terminal design
Ultra Lightweight: only 1.5 lbs. Enjoy better handling, braking and acceleration
High Power: 240 Cranking Amps. Faster motor turnover and better starting
Tiny Footprint: 4.25 x 2.25 x 3.75-in. Adhesive-backed Foam included for easy installation

Features:

Less volume and weight: 1/3 of normal lead-acid battery
Exceptional cycle life: more than 2000 cycles under JISD standard (lead-acid battery 150-300 cycles).
No maintenance needed for almost a year.
No pollution: safe for the environment. Does not contain any acid and heavy metals such as lead, cadmium, or mercury
Incredibly fast recharge rate

Features:

Less volume and weight: 1/3 of normal lead-acid battery
Exceptional cycle life: more than 2000 cycles under JISD standard (lead-acid battery 150-300 cycles).
No maintenance needed for almost a year. Incredibly fast recharge rate.
No pollution: safe for the environment. Does not contain any acid and heavy metals such as lead, cadmium, or mercury
Replaces: PTZ7S, M727ZS, FAYTZ7S, GTZ7S, CTZ7S, and others

Features:

Less volume and weight: 1/3 of normal lead-acid battery
Exceptional cycle life: more than 2000 cycles under JISD standard (lead-acid battery 150-300 cycles).
No maintenance needed for almost a year.
No pollution: safe for the environment. Does not contain any acid and heavy metals such as lead, cadmium, or mercury
Incredibly fast recharge rate

Features:

NEVER GET STRANDED AGAIN! These are the First Motorsports Batteries with built-in RE-START technology & a Battery Management System (BMS) The New 4 Terminal Design means DUAL POLARITY!
Direct replacement for these OEM battery sizes: YTZ10S YTZ12 YTZ14 YTX9 YTX7A-BS YT12A-BS. Please Note: For custom V-twin applications over 103 cubic inches or when a higher compression, modified motor is being used we do not recommend RE-START batteries due to the extremely high current draw of larger V-twin motors. Please use the following models for large V-twin applications: YTX20, YTX12-24, YTX12-20, or V-10.
CRANKING AMPS: 360 AMP HOURS: 10Ah (PbEq) WEIGHT: 2 Pounds 4.6 Ounces WIDTH: 3-1/2″ Length: 5-15/16″ Height: 3-3/4″
The ATZ10-RS offers the first FULL Battery Management System (BMS) found on a Powersport Battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing.
RE-START TECHNOLOGY: The RE-START Battery intelligently monitor its status; if it senses over-discharge it will put itself into a sleep mode, yet saves enough energy to allow you to RE-START your vehicle. Simply press the RE-START button on battery. (A Remote RE-START Button will soon be Available so you can activate the RE-START feature without accessing battery.)

Features:

✅{ Fully Automatic } – No need of any manual operation, just plug and leave it for charging and maintaining your batteries automatically for long time.
✅{ Micropressor Controlled 4-Stage Charge } – Diagnosis, Bulk charge, Absorption and Maintenance. The microprocessor controlled program will automatically charge the battery at proper charging rate in each stage and maintain the battery at proper voltage for long time.
✅{ Safety Protections } – Multi-level safety barrier prevents unsafe and abnormal conditions. No worry about overcharge, short circuit and reverse palarity; Spark Free for safety. Stop charging for batteries with cells problem to ensure safety (when batteries voltage <8volts ).
✅{ LED Indicators } – 4 LED Indicators: Power, Charging, Charged/Maintain and Reverse Connection. With SAE quick release connectors design.
✅{ ECO-Friendly } – Zero current draw from the battery and low power consumption. Comply with the highest energy saving standard. Certified by ETL for safety and approved by CEC for energy saving.

Features:

Don’t let its size fool you… This thing packs a punch! Replace that huge, heavy lead-acid OEM battery with a compact, lightweight lithium ion battery from Antigravity.
Weighs 16 Ounces. 120 Cranking Amps (6Amp Hours PB Eq) Capable of cranking 600cc 4 cylinder race bikes! (350cc everyday use bike.)
Mounts just about ANYWHERE. Even upside down. Vibration resistant.
Comes PRE-CHARGED with adhesive backed foam for an easy installation. ***USE A LITHIUM ION CHARGER TO AVOID DAMAGING THE BATTERY***
Industry leading 3-Year Warranty! **All warranty claims are handled directly by Antigravity Batteries. Please contact us for a claim form in the event a battery is damaged/defective**

Features:

Antigravity AG-1201 Lithium Motorcycle/Motorsports Battery, Small Case format
Built to high quality standards with unbreakable all-Brass terminal design
Ultra Lightweight: only 2. 25 lbs. Enjoy better handling, braking and acceleration
High Power: 360 Cranking Amps. Faster motor turnover and better starting
Tiny Footprint: 4. 5 x 3. 25 x 4. 25-in. Adhesive-backed Foam included for easy installation

Features:

Less volume and weight: 1/3 of normal lead-acid battery
Exceptional cycle life: more than 2000 cycles under JISD standard (lead-acid battery 150-300 cycles).
No maintenance needed for almost a year.
No pollution: safe for the environment. Does not contain any acid and heavy metals such as lead, cadmium, or mercury
Incredibly fast recharge rate