Top 10 Best Gps Receiver For Raspberry Pi Of 2022 – Review And Buying Guide

Features :

• VK-162 GPS support for windows and for linux system, not for android and IOS system
• The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
• For amateur radio operators who need accurate timing for digital communications, this is a unit that will help synchronize the timing for those modes.
• This device is extremely accurate. It usually takes a couple of seconds to acquire the initial fix, followed up shortly by acquiring additional satellites for a more precise fix.

Features :

• The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us
• G72 gps usb use the newer chip, better than vk-172 gps.This usb gps works with Windows, Linux and Google Earth, not for IOS Android
• The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change
• You need to install driver before use it on window, but plug and play for raspberry pi.
• How to Setup GPS for Raspberry Pi? Please contact me

Features :

• VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
• If you have any issue when using our product,or you need product use documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us
• The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
• It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
• This usb gps can be used for mac computer, but it requires very professional technical skills.

Features :

• Working process: Menu-> Receiver->Port or SensorAPI to get data from GPS Receiver after instialled U-CENTER V8.2X GNSS software (Software can be downloaded from CD-ROM and Official website)
• Compatible: Win 10/ Win 8/ Win 7/Vista/XP/98/CE. Free GNSS Evaluation Software. 56-Channel All-IN-VIEW Tracking
• U-BLOX 7 Chipset inside, USB Port, Magnetic base, High sensitivity and Strong Singal,Protocol: NMEA 0183/ Japan QZSS/ India Gagan/ WAAS/ EGNOS/ MSAS Support. High Tracking Sensitivity
• Cable Length 6.5 Ft / 2 Meters , IPX4 Water Resistance / Dust-tight.
• Support OpenCPN on Raspberry Pi, Realtime Google Earth Pro and maps. 1 Year Warranty

Features :

• MULTI-PLATFORM: Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
• STRATUX READY: plug and play and supported by Stratux project.
• LONG CORD: 7 ft. cord for remote mounting with magnetic base.
• UPDATED CHIP: u-blox 7 chipset, WAAS capable.
• DURABLE: IPX6 waterproof / dust-tight.

Features :

• Different from old version vk-162 gps, this vk-162 usb gps dongle uses the newer 8th chip.
• VK-162 gps support windows and linux system, not compatible with android and IOS
• You need to install driver before make it work on window, but plug and play for linux. Please check document link in picture.
• vk-162 remote mount usb gps has flash to save setting. It makes you use gps receiver more convenient next time.
• If you have any problem, please contact seller as follow: click “DIYmalls”(you can find “Sold by DIYmalls” under Buy Now button), in the new page, click “Ask a question”.

Features :

• Works with Windows,Andorid,Linux,Raspberry pi.Support Google Earth.It can not work with IOS system.
• Raspberry pi and linux no need driver.
• The default output is the product GPs protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
• Note: This dongle only can work outdoor. If you want to let it work indoor, you need have GPS amplifier. Otherwise the GPS can not lock.
• If you need some driver links and using videos for VK-172,Please contact us.

Features :

• BN-220 has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
• When you use it for Raspberry Pi, there is no driver needed but you need to install software
• The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
• Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
• The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us

Features :

• This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.
• Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing.
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
• Supports U-Center, an easy way to config the module. Supports DDC (I2C compliant) interface: up to 400KHz (max)
• Onboard USB TO UART converter CP2102 for serial debugging. Breakouts the module’s UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts.

Features :

• 🚩 This VK-172 usb gps glonass module can support Windows Andorid Linux sytem, Raspberry PI and EMGRAND car and Google Earth.
• 🚩 The default output of Vk 172 g-mouse is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
• 🚩 Plugged this VK 172 USB dongle module into linux machine, detected as ttyACM0. No additional drivers or configuration required
• 🚩 You need install the driver before use it, and you can find the User Manual [pdf ] / User Guide [pdf ] on this listing page – Technical Specification
• 🚩 Please contact us for some driver links and using videos for VK-172 if you need. How to email us? Please click “Stemedu” (you can find “Sold by Stemedu” under Buy Now button), in the new page, click “Ask a question” to email us