10 Best Car Amplifier For Mids In 2022 – Expert Review

Features :

• Power – 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
• Class A/B Topology – Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
• Full Range – With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
• Variable Gain Control – The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier

Features :

• 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
• RMS Power at 2 Ohms: 125 Watts x 4 Channels
• RMS Power at 4 Ohms: 75 Watts x 4 Channel
• User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
• 4 Way Protection Circuitry | Frequency Response: 20 Hz – 20,000 Hz
• Signal to Noise Ratio: 105 dB

Features :

• 400 W MAX Power @ 2 Ohm x 4 Channels
• 200 W MAX Power @ 4 Ohm x 4 Channels
• 800 W MAX Bridged Power @ 4 Ohm x 2 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control, Blue Backlit Illumination
• Dimensions: Depth 13.5” x Width 10” x Height 2.4”
• 6 Year Platinum Online Dealer Warranty

Features :

• 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged output at 2 ohms for a high quality audio
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2×30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63” W, 1.78” H, and 14.02” L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

Features :

• 1000 watt 4 channel PowerDriveX series class AB car amplifier
• Low noise pre amplifier
• Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
• Low level RCA inputs and outputs
• Highest sound quality connection

Features :

• POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

Features :

• Show your friends you can do 70 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this car speaker amplifier
• Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application; but don’t let the size fool you, this 4ch car amp produces amazing sound quality
• MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists
• 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier
• Car stereo amplifier with 110 watts RMS at 2-ohm load x 4-channels (14.4v); 80 watts RMS power at 4-ohm load x 4-channels (14.4v); 160 watts RMS at 4-ohm bridged x 2-channels (14.4v)

Features :

• Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Features: Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!.
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). – 2 Ohm: 200 Watts x 4 Channel <1% THD+N . - 4 Ohm:135 Watts x 4 Channel <1% THD+N. - 4 Ohm Bridged: 400Watts x 2 Channel<1% THD+N.
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). – 2 Ohm: 800 Watts x 4 Channel. – 4 Ohm:540 Watts x 4 Channel. – 4 Ohm Bridged: 1600 Watts x 2 Channel. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Optical Coupler Class “AB” Technology. Studio-Grade Bipolar Output Stage Transistors.
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz – 3KHz. High Pass Filter: 15Hz – 1KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 10Hz – 50KHz. Damping Factor: >150 @ 100Hz. 35 Amp*3 ATC Fuse. Dimensions: (W x H x L) 9″ x 2.4″ x 21.0″

Features :

• Maximum power @ 14. 4VDC – 2 x 50W RMS (stereo 2 ohms)
• Maximum power consumption: 7. 6 amps (musical: 3. 8 amps)
• Channels: 2, topology: class-d
• Min. Supply voltage: 8 VDC, Max. Supply voltage: 16 VDC
• Protection system: short circuit in the output/thermal protection

Features :

• Power – 50 Watts Max x 2 @4-Ohms
• Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• High & Low Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Fixed Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set sound specifications for the bass frequency reproduction
• Fixed High-Pass Crossover – Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” including mid ranges and tweeters
• Specs – Dimensions: 4” x 3.13” x 1.83”, Weight: 1.08 lbs.
• Warranty – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality