10 Best Bench Vise Made In Usa In 2022 – Expert Review

Features :

• MADE IN THE USA – The vise jaw reengineered from the ground up and built to a higher standard in the USA
• 12 N48 SPEC MAGNETS – 7 lbs of force each keep jaws solidly on the vise; Nothing else comes close
• NO FAIL DESIGN – Magnets secured with stainless screws and recently upgraded commercial-grade epoxy
• ENHANCED MATERIAL – Our proprietary reinforced polymer composite with textured face Is incredibly tough yet softer and grippier than nylon while maintaining rigidity
• THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking
• PROTECTIVE SURFACE – Specially textured surface won’t mar, scratch or discolor. Tested on cerakote, chrome, aluminum, plastic, painted surfaces, and more
• TIGHT TOLERANCES – true flat surfaces, angles, and dimensions reduces wobble and improves fit and hold
• TRULY UNIVERSAL – Superior hold and compression across a wide range of torque/clamping pressure. Reversible for flat and round/irregular shaped work pieces
• LIMITED LIFETIME GUARANTEE – We stand behind our products and our customers 100%
• TOOLS, not toys. Designed and built in the USA by Frictionworks. We take polymer seriously…seriously

Features :

• Casting Clamp force: 7,000 lbs. and Torque rating: 165 Ft-Lb
• Durable Rotating head constructed in 60,000 PSI ductile iron, stationary body cast in 30,000 PSI cast (grey) iron
• Jaw Width: 5″ (12.7CM) x Jaw Opening: 4-7/8″ (12.4CM) x Throat Depth: 3″ (7.6CM) x Pipe Capacity: 0.5″D x 2.5″D (1.3 x 6.4CM)
• 360 degrees Rotating Head For Clamping Material At Any Angle
• Large 3.2″ x 2.5” (8.1CM x 6.3CM) anvil work surface for flat shaping
• 360-degree locking swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
• Machined Q235 steel main screw 0. 74″D with rolled single acme threads at 4 threads per inch
• Three (3) different sets of jaws for gripping parts: Machinist Jaws, Pipe Jaws and V-Jaws.
• 0.5″D x 7. 48″ Long handle
• Base mounting tabs: (4) x 0.5″D, mounting hardware not included.

Features :

• Home Work Shop Vise, woodworking, assembly, general maintenance.
• Jaw width: 4-1/2″ (11.4CM) x Jaw opening: 3″ (7.6CM) x Throat depth: 2.4″ (6.1CM)
• Holds 0. 6″ D to 1. 85″ D pipes and tubes (1. 5CM x 4. 7CM)
• 30, 000 PSI cast iron construction, blue power coat finish
• Anvil: 1. 75” x 2” (4. 4CM x 5. 1CM)
• Screw Diameter: 0. 6” (1. 5CM), Handle Diameter: 0. 4” (1CM) x Handle Length 6” (15. 2CM)
• 240-Degree Swivel base allows rotating the vise for versatility
• Swivel base features (4) mounting tabs
• Product Dimensions and Shipping weight: 9. 5” x 4. 5” x 5. 75” (3. 7CM x 1. 8CM x 2. 3CM) and 10. 7 pounds (4. 9Kgs)
• Installation hardware not included: (4) bolts 3/8” x table thickness

Features :

• Clamp force: 3, 150 lbs. and Torque rating: 73 Ft-Lb
• Jaw Width: 4. 5″ x Jaw Opening: 4″ x Throat Depth: 2. 62″
• Pipe Capacity: 1/8″ x 2″ Diameter, pipe jaws are cast-in place
• 360-degree swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
• High-strength steel bar and 30, 000 psi cast iron vise components
• Machined steel main screw with rolled threads
• Replaceable Hardened Steel Serrated (Top) Jaws
• 0. 43″D x 6. 5″Long handle with rubber bumpers
• 2. 64″ x 2. 52″ pounding surface
• Base mounting tabs: (4) x 7/16″D

Features :

• Includes 1-pc. 120-degree swivel bench vise: 4 in.; Product manual; Mounting template
• Cast iron construction (30,000 PSI tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip
• 120-degree swivel base with dual lock-down nuts positions workpiece where you need it
• Three mounting holes anchor vise securely to workbench
• Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces
• Acme-threaded screw glides smoothly without binding
• Requires three 3/8-inch diameter bolts (not included) for mounting

Features :

• Multipurpose Design: These 4″ nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.
• Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.
• Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more.
• 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Features :

• DURABILITY: Have castings with a 30,000 PSI gray cast iron body built for rugged use and extended life.
• SECURE HOLD: Capable of mounting to the bench with 4 mounting posts providing more stability and secure hold
• 360 DEGREE SWIVEL: Base can swivel 360 degrees with double lockdown for quick and easy positioning
• LIFETIME WARRANTY: Product is built to last. Wilton warrants every product they sell against manufacturers’ defects.
• PERFORMANCE: Has built-in pipe jaws handle various pipe sizes and rubber pinch safety guards

Features :

• QUICK SETUP: Indexed at 30 degree increments for quick set up
• STRONG GRIP: Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life
• 360 DEGREE ROTATING HEAD: Can clamp material at any angle
• PERFORMANCE: Has built-in pipe jaws and a V-jaw to easily hold round objects vertically

Features :

• Jaw width:125mm(5″), Opening: 125mm(5″), Throat Depth: 67mm(2.6″), Clamp force: at least 5500lbs
• More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000
• Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise
• Great for clamping and fixing workpiece: Higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space
• Perfect Dual-Purpose Vises: This 5″ vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works

Features :

• Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb
• Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises
• Jaw Width: 5″ (12.7CM) x Jaw Opening: 5″ (12.7CM) x Throat Depth: 4″ (10.2CM) x Pipe Capacity: 0.125”D x 3.5″D (0.32CM x 8.9CM)
• Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5″ x 2.7″ (8.9CM X 6.9CM) anvil work surface;
• 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle
• Machined Q235 steel main screw 0. 75″D with rolled single acme threads at 4 threads per inch
• Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws
• 0.51″D x 9. 5″ (1.3CM x 24.1CM) Long handle with rubber bumpers
• Base mounting tabs: (4) x 9/16″D (14MM), mounting hardware not included.
• Warranty: Castings – 3 years